You’ve without doubt heard that today’s hearing aids are “not your grandfather’s hearing aids,” or that hearing aid technology is light-years ahead of where it used to be, even as recently as 5 to 10 years ago. But what makes modern technology so much better? And what exactly can modern hearing aids achieve that couldn’t be achieved in the past?
The abbreviated answer is, like the majority of electronic devices, hearing aids have benefited greatly from the digital revolution. Hearing aids have evolved into miniaturized computers, with all of the programming flexibility you would expect from a modern computer.
But before hearing aids became digital, they were analog. Let’s see if we can determine why the shift from analog to digital was such an advancement.
Digital vs analog hearing aids
At the simplest level, all hearing aids function the same way. Each hearing aid consists of a microphone, amplifier, speaker, and battery. The microphone detects sound in the environment, the amplifier strengthens the signal, and the speaker supplies the louder sound to your ear.
Fundamentally, it’s not very sophisticated. Where is does get complicated, however, is in the particulars of how the hearing aids process sound, which digital hearing aids accomplish far differently than their analog counterparts.
Analog hearing aids process sound in a fairly straightforward manner. In three basic steps, sound is detected by the microphone, amplified, and presented to the ear through the speaker. That is… ALL sound is made to be louder, including background noise and the sound frequencies you can already hear well. In other words, analog hearing aids amplify even the sounds you don’t want to hear — think of the scratching sound you hear from an analog recording on a vinyl record.
Digital hearing aids, on the other hand, add a fourth step to the processing of sound: transformation of sound waves to digital information. Sound by itself is an analog signal, but rather than merely making this analog signal louder, digital hearing aids first convert the sound into digital configuration (saved as 0s and 1s) that can then be changed. Digital hearing aids, therefore, can CHANGE the sound before amplification by altering the information stored as a series of 0s and 1s.
If this sounds like we’re talking about a computer, we are. Digital hearing aids are basically miniature computers that run one dedicated program that manipulates and enhances the quality of sound.
Advantages of digital hearing aids
Most today’s hearing aids are digital, and for good reason. Given that analog hearing aids can only amplify incoming sound, and cannot adjust it, analog hearing aids have a tendency to amplify disruptive background noise, making it difficult to hear in noisy environments and nearly impossible to talk on the phone.
Digital hearing aids, however, have the versatility to amplify select sound frequencies. When sound is converted into a digital signal, the computer chip can recognize, distinguish, and store specific frequencies. As an example, the higher frequency speech sounds can be labeled and stored separately from the lower frequency background noise. A hearing specialist can then program the computer chip to amplify only the high frequency speech sounds while suppressing the background noise — making it easy to follow conversations even in noisy environments.
Here are some of the other advantages of digital hearing aids:
- Miniaturized computer technology means smaller sized, more discreet hearing aids, with some models that fit totally in the ear canal, making them practically invisible.
- Digital hearing aids tend to have more eye-catching designs and colors.
- Digital hearing aids can be programmed by a hearing specialist to process sound differently based on the setting. By changing settings, users can attain ideal hearing for varied scenarios, from a quiet room to a noisy restaurant to speaking on the phone.
- Digital hearing aids can be fine-tuned for each patient. Each person hears different sound frequencies at different decibel levels. Digital hearing aids permit the hearing specialist to adjust amplification for each sound frequency based on the attributes of each person’s distinctive hearing loss.
Try digital hearing aids out for yourself
Reading about digital hearing aids is one thing, trying them out is another. But bear in mind, to get the most out of any set of hearing aids, you require both the technology and the programming mastery from an seasoned, licensed hearing specialist.
And that’s where we come in. We’ve programmed and fine-tuned countless hearing aids for people with all forms of hearing loss, and are more than happy to do the same for you. Give us a call and experience the digital advantage for yourself!